Hi everyone,
Please don't throw rocks at me, I know there've been number of similar threads, however after reading them i became even more confused.
We never had any thermostats before in our house, so after research I decided to plump for Honeywell DT92E. But when I opened my junction box I was like "Holy crap!"
So anyway, I made photo, would like to aplologise for blurry image, hopefully someone would be able to help me.
Starting from the left:
1st wire (going under two other wires) - Danfoss FP715 programmer
2nd wire - Danfoss HSA3 3way valve actuator
3rd wire - grundfos pump
4th wire - mains (I think)
5th wire - Danfoss thermostat type AT (on HW cylinder)
6th wire - Baxi solo 2 40 PF boiler (I think)
Any help would be greatly appreciated, and if you can make it simple please (e.g. connect brown wire from pump to B terminal on Honeywell actuator)
Thanks, Jay
Please don't throw rocks at me, I know there've been number of similar threads, however after reading them i became even more confused.
We never had any thermostats before in our house, so after research I decided to plump for Honeywell DT92E. But when I opened my junction box I was like "Holy crap!"
So anyway, I made photo, would like to aplologise for blurry image, hopefully someone would be able to help me.
Starting from the left:
1st wire (going under two other wires) - Danfoss FP715 programmer
2nd wire - Danfoss HSA3 3way valve actuator
3rd wire - grundfos pump
4th wire - mains (I think)
5th wire - Danfoss thermostat type AT (on HW cylinder)
6th wire - Baxi solo 2 40 PF boiler (I think)
Any help would be greatly appreciated, and if you can make it simple please (e.g. connect brown wire from pump to B terminal on Honeywell actuator)
Thanks, Jay