This maybe be a silly question but i am insulating and lining the garage wall, this is a single skin brick which i intend to but DPM, 50mm Celotext\Kingspan\Xtratherm board on followed by 25mm battens and then finally plasterboard.
Along the wall are 2 brick pillars which are therefore 2 bricks thick, so do i wrap these in 50mm of insulation as well or can i just batten over them or can i reduce the insulation.
Thanks
Dave
Along the wall are 2 brick pillars which are therefore 2 bricks thick, so do i wrap these in 50mm of insulation as well or can i just batten over them or can i reduce the insulation.
Thanks
Dave
