Im about to install a new kitchen with a intergrated washing machine. The problem is that the sinks cold and hot water plumbing run behind were the washing machine will go. is the washing machine goin to fit? ive looked at several different machines but they all are different sizes with no accurate depth measurements.
intergrated washing machine fit.
- Thread starter ljstrawson
- Start date
Sponsored Links
Can you either run the pipe work under the floorboards, which will erase any problem or run the pipes at a lower level 50mm-75mm from the floor.
Usually does the trick.
Usually does the trick.
i wish i could, concrete floors. i wish manufacturers would be more clearer on there measurements :s
Sponsored Links
You make it fit.
You lower the pipework or you bury it in the wall or you use deeper worktop so it can sit in front, or you redesign the kitchen.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
