Junckers 14mm - creaking boards!

Joined
24 Jun 2008
Messages
2
Reaction score
0
Country
United Kingdom
Anyone out there having problems with Junckers 14mm boards? When walked on our floorboards are creaking and clicking. Followed Junckers instructions - laid plastic membrane and foam matting ; we have under floor heating so used the recommended clipping system. Wondering if it's connected to the 14 mm boards? Anyone with 22mm experiencing same problem??
 
Sponsored Links
Underfloor heating and DPM + foam underlayment?
Strange combination.

Any condensation from temperature changes in the underfloor heating is trapped. It should have been glued down in my opinion.
What was recommended by your underfloor heating system company?
 
Thanks for your interest.

Followed Junckers technical department instructions word for word for Under Floor Heating. Membrane supposed to stop condensation from subfloor. Were advised to use clips and not glue. Wonder if 14mm board is just too thin and flexible to resist creaking and popping problems? Junckers insisted we put 14mm (instead of 22mm) with UFH for heat efficiency. Not an uneven sub-floor as it's all over....any suggestions/explanations appreciated...
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top