Junction Box Required?

[Mars0]

So Iv changed the rose light to led. All went well. However, Iv been informed that I should put the wago connectors in a junction box before putting back in ceiling. Is that correct?

 

[CountryFan]

Probably have to be maintenance free too. What have the Wago’s been used for?

 

[Mars0]

used the wago to clip in the cables so I can connect a flex cable to the led light

 

[333rocky333]

Informed by who, as far as i know the connecters would need enclosing if pushed in the ceiling, if they are below the ceiling and within that fittings base then they do not need a seperate enclosure.
If the fitting is marked DOUBLE INSULATED then things would be different.

 

[Mars0]

Informed by who, as far as i know the connecters would need enclosing if pushed in the ceiling, if they are below the ceiling and within that fittings base then they do not need a seperate enclosure.
If the fitting is marked DOUBLE INSULATED then things would be different.

No room within the base so pushed them in the ceiling

 

[morqthana]

When I had work done last year the electrician used these for lights

QUICKFIX JB-3 | Maintenance-free junction boxes for WAGO 221

QUICKFIX- JB3 - Maintenance-free junction (Includes Wago) DESIGNED FOR USE WITH WAGO 221 SERIES CONNECTORS Specifications Designed for cable sizes 1.0MM, 1.5MM & 0.75mm flex Can handle up-to 16 amps. Complies with BS5733 & 18th Edition Wiring Regulations. High-Quality Polypropylene Material...

quickfixjb.co.uk

Fits through quite a small hole.