Hi there - saw Keego's post on a thread back in 2009 about a boiler continuing to run due to a residual voltage showing on the orange wire on a motorised valve (about 70v).
I've got exactly this issue with a Drayton valve and was hoping you might be able to recommend a component value that I could try.
The valve operates fine otherwise and switches 230V through to the boiler when it's driven open, however when it closes it doesn't drop to 0V but stays at about 70V.
thanks for your help
Chris
I've got exactly this issue with a Drayton valve and was hoping you might be able to recommend a component value that I could try.
The valve operates fine otherwise and switches 230V through to the boiler when it's driven open, however when it closes it doesn't drop to 0V but stays at about 70V.
thanks for your help
Chris
