I'm installing a new sink & the 40mm waste pipe for my sink drain is a little bit too high for the trap.
This is the trap:
http://www.ikea.com/gb/en/catalog/products/40215522/
Can I get away with that? The water would be at worst 1 inch over the top of the trap.
What's the worst that can happen?
(I'm guessing this is a non-starter so I've started another thread asking about drilling through walls.)
This is the trap:
http://www.ikea.com/gb/en/catalog/products/40215522/
Can I get away with that? The water would be at worst 1 inch over the top of the trap.
What's the worst that can happen?
(I'm guessing this is a non-starter so I've started another thread asking about drilling through walls.)