Hi All,
I've got a couple of large (1.8m x 0.6m x 30mm) honed slate slabs to lay on a latexed concrete constructional hearth.
My question is: what depth adhesive should I use for these enormous slabs? I've got a 10mm slotted trowel from laying large format limestone tiles. Is that OK, or should I be doing it thicker? If so, how thick?
Thanks,
Adam
I've got a couple of large (1.8m x 0.6m x 30mm) honed slate slabs to lay on a latexed concrete constructional hearth.
My question is: what depth adhesive should I use for these enormous slabs? I've got a 10mm slotted trowel from laying large format limestone tiles. Is that OK, or should I be doing it thicker? If so, how thick?
Thanks,
Adam