I am planning to fit 10sqm of oak flooring in my converted garage.
The existing floor looks flat, but using a flat edge, it can be seen to slope from about halfway in length. over 2m its over an inch difference.
Leveling the floor completely would mean the flooring would be higher then the door
If I make some of it up, can it still be laid with a slight slope?
The existing floor looks flat, but using a flat edge, it can be seen to slope from about halfway in length. over 2m its over an inch difference.
Leveling the floor completely would mean the flooring would be higher then the door
If I make some of it up, can it still be laid with a slight slope?