I have connected the waste outlet of the bath to the trap using ptfe tape but the connection still leaks when water is released. Any help appreciated.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Leaking bath waste
- Thread starter deanjmason
- Start date
The trap is leaking?
Change it or make sure the washers are fitted properly. Make sure it is lined up with the waste pipe properly and not at an angle.
Change it or make sure the washers are fitted properly. Make sure it is lined up with the waste pipe properly and not at an angle.
Thanks Bahco. The leak is from where the trap is screwed on to the bath outlet.
I will check points mentioned.
I will check points mentioned.
N
Newboy
Take the PTFE tape off - the trap seals to the waste with a rubber seal which needs to be fully tight to the underside of the waste. The PTFE may be stopping you from screwing the trap fully home. You only need to use PTFE where the threads form the seal - not in this case
Thanks all for you help. Fitted new washer and removed PTFE tape and problem solved.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
