LED and normal light switch options

[bolst3r]

I'm looking to run two sets of light from one, two gang plain white dimmer switch but i'm finding a suitable one hard to find and somewhat confusing...

I'm looking to run the following:

dimmer-1 = 3 x ZEP1 (http://www.ecoledlight.co.uk/ecoled-zep1-recessed-downlight~493) or 3 x inceptor (http://www.scolmore.com/inceptor.html)

dimmer-2 = 2 x 100w traditional wall up lighters (http://www.sparksdirect.co.uk/arwin-0432-wall-light-ceramic-wall-uplighter)

thanks for any help

 

[riveralt]

The Vpro range of Varilight allows both types of lights to be run from a double gang dimmer within the range of led's (total load 10w min) and incandescent lamps.
You may struggle to find 100w incandescent lamps unless you go for the 'rough service' lamps.

http://www.varilight.co.uk/products/vpro.html

 

[bolst3r]

@Riveralt

thanks for the link and extra info It says on those wall lights that I can also use energy saving bulbs, will this dimmer still be ok with the following bulb as it seem compatible with those lights?

http://www.energysavingonline.co.uk/20watt-dimmable-edison-screw-spiral-light-bulb-by-eveready

Thanks again

 

[riveralt]

@Riveralt

thanks for the link and extra info It says on those wall lights that I can also use energy saving bulbs, will this dimmer still be ok with the following bulb as it seem compatible with those lights?

http://www.energysavingonline.co.uk/20watt-dimmable-edison-screw-spiral-light-bulb-by-eveready

Thanks again

They should work but you will need to check with varilight.
They do make their own dimmable energy savers - guaranteed to work with their dimmers.
http://www.varilight.co.uk/lighting/cflsdimmer.html

 

[bolst3r]

TBH, I only need two so am happy to buy the varlight bulbs if they're going to work properly...

Thanks again