Hi,
Just about to get the kitchen refitted and the subject has turned to the lighting.
Essentially I want to have the following 2 circuits wired into the light switches:
1. Under cabinet lighting - colour changing strip led lighting all linked to same controller
2. Plinth lighting - colour changing strip led lighting all linked to same music controller
The plinth light will be in 3 sections around the room, so will have gaps of around 6 metres between each section, by the time I take cable up into the roof space and back down. I am not sure how I would cable this all up, so that there would be no noticeable difference in colour between the sets!
I am looking at the SMD 5050 60/m led strip light consuming 14.4W per metre.
Something along the lines of this:
Any help would be appreciated
Many thanks
Matthew
Just about to get the kitchen refitted and the subject has turned to the lighting.
Essentially I want to have the following 2 circuits wired into the light switches:
1. Under cabinet lighting - colour changing strip led lighting all linked to same controller
2. Plinth lighting - colour changing strip led lighting all linked to same music controller
The plinth light will be in 3 sections around the room, so will have gaps of around 6 metres between each section, by the time I take cable up into the roof space and back down. I am not sure how I would cable this all up, so that there would be no noticeable difference in colour between the sets!
I am looking at the SMD 5050 60/m led strip light consuming 14.4W per metre.
Something along the lines of this:
Any help would be appreciated
Many thanks
Matthew