hi all, please can someone advise on my loft plumbing situation
so I have a cold water tank in the loft with a ballcock valve.
the ballcock joins to the pipe shown in this video: http://www.pinkbike.com/video/397206/
it keeps leaking really badly at this point, and i cant move the fitting back enough to properly ptfe tape it (or really do anything that lasts).
is there anything i can do to fix quick? or do i really need to replace the pipework going into it? the pipe gets thicker which is why i cant pull the fitting back
hope that makes sense, sorry about the bad quality video
thanks for any advice :s
so I have a cold water tank in the loft with a ballcock valve.
the ballcock joins to the pipe shown in this video: http://www.pinkbike.com/video/397206/
it keeps leaking really badly at this point, and i cant move the fitting back enough to properly ptfe tape it (or really do anything that lasts).
is there anything i can do to fix quick? or do i really need to replace the pipework going into it? the pipe gets thicker which is why i cant pull the fitting back
hope that makes sense, sorry about the bad quality video
thanks for any advice :s