Looking for a Gas Safe Engineer to Install Gas Fire Insets

[vahids1639]

Hi,

I’m looking to hire a qualified Gas Safe engineer to install gas fire insets in the living room and dining room of my 1930s semi-detached house in Bristol.
The work will involve:

• Running gas pipes to the chimney openings (there’s an existing gas pipe under the floorboards, and another was previously connected to a gas burner).
• Installing the gas fire insets once the chimneys are ready.

No building work is needed as the hole size is already in line with the inset requirements from the manual.
I need gas safe certificate for the pipe works and the gas fire fitting.
I will arrange for the chimneys to be swept, inspected, and smoke-tested beforehand to determine whether lining is needed.
If you’re experienced with this type of work and available, please get in touch.

Thanks!
Vahid

 

[vahids1639]

Not sure why it has been extremely difficult to find a gas safe engineer to fit a gas fire.

 

[gas112]

Stick your postcode in here and it will bring up local ones then check to see if they have fire qualification

Gas Safe Register - The Official List of Gas Safe Registered Businesses - Gas Safe Register

Gas Safe Register replaced the CORGI registration in 2009. It is the official list of gas engineers who are qualified to work legally on gas appliances.

www.gassaferegister.co.uk

 

[vahids1639]

Thanks, that's what I did and I chose the gas fire installation option. A few didn't answer and other said they won't fit gas fire. That's why I posted here hoping to find someone here.

 

[vahids1639]

I keep looking ....