Hi!
First time on this site, so please be gentle!
I've had a look through the FAQ and and not sure if item 17 covers this, as it seemed to be related to mixer taps only.
Basically, I had a leaky tap in the kitchen. I turned off the cold water, at the stop cock, turned off the hot from the tank and tried to fix the tap (unsuccessfully, as it happens!).
After turning everything back on again, the cold water pressure in the upstairs bathroom is rubbish. The toilet is taking ages to fill and both the bath and the sink cold water taps are suffering very low pressure. The pressure downstairs in the kitchen is fine. The pressure from the hot taps is fine upstairs and down.
I've checked the stock cock and it's fully open.
Not sure what else to look for? Could it be related to air in the system?
Any thoughts would be greatly appreciated!
Kind regards,
mroshaw
First time on this site, so please be gentle!
I've had a look through the FAQ and and not sure if item 17 covers this, as it seemed to be related to mixer taps only.
Basically, I had a leaky tap in the kitchen. I turned off the cold water, at the stop cock, turned off the hot from the tank and tried to fix the tap (unsuccessfully, as it happens!).
After turning everything back on again, the cold water pressure in the upstairs bathroom is rubbish. The toilet is taking ages to fill and both the bath and the sink cold water taps are suffering very low pressure. The pressure downstairs in the kitchen is fine. The pressure from the hot taps is fine upstairs and down.
I've checked the stock cock and it's fully open.
Not sure what else to look for? Could it be related to air in the system?
Any thoughts would be greatly appreciated!
Kind regards,
mroshaw