I have a bathroom floor to tile with fan shaped mats of mosaic. The individual pieces of marble are about half an inch square, the "fans" about 150 by 115mm. The squares are about 6mm thick - they vary a bit. The floorboards will be replaced with 22mm ply and electric heating wires laid on top.
Plan to use flexible adhesive and stone coloured grout with flex additive, and a marble sealant such as produced by Hagesan, on top.
Any tips/comments/warnings would be welcome.
Plan to use flexible adhesive and stone coloured grout with flex additive, and a marble sealant such as produced by Hagesan, on top.
Any tips/comments/warnings would be welcome.
