Marley Cedral Cladding (pics).

[noseall]

For those of you interested in looking at the Marley cladding I thought I'd start a separate thread. Here are some more pic's of the job I have done recently. Hopefully the scaffold will be down tomorrow and I'll add more to this thread, if anyone wants to see more pics.

Cderal1

• noseall
• 4 Dec 2017

Cedral2

• noseall
• 4 Dec 2017

Cedral3

• noseall
• 4 Dec 2017

Cedral8

• noseall
• 4 Dec 2017

Cedral6

• noseall
• 4 Dec 2017

Cedral9

• noseall
• 4 Dec 2017

Cedral7

• noseall
• 4 Dec 2017

Cedral4

• noseall
• 4 Dec 2017

 

[Ian H]

What the job you have done? A massive dormer,

 

[noseall]

What the job you have done? A massive dormer,

Yeah. Basically it was a dormer house prior but with a dull looking flat roof dormer 2/3rds of the way across the house. I removed the existing dormer and re-built the entire first floor frontage with what you see above.
When the scaffold is down I'll show before and after pics.

 

[Mw Roofline]

Looks super

 

[^woody^]

I dont like the windows, but otherwise the carpentry is improving along with the recent brickwork.

 

[noseall]

Here we go...
Before.....

Cedral One

• noseall
• 5 Dec 2017

Cedral Two

• noseall
• 5 Dec 2017

After.....

Cedral Five

• noseall
• 5 Dec 2017

Cedral Three

• noseall
• 5 Dec 2017

Cedral Six

• noseall
• 5 Dec 2017

Cedral Seven

• noseall
• 5 Dec 2017

Cedral Four

• noseall
• 5 Dec 2017

 

[datarebal]

Dont like the windows...

 

[noseall]

Dont like the windows...

OK, ok. I'll post some more piccies with some better windows in after Friday. Promise.

 

[pilsbury]

Nice. Reminds me of an American house.

 

[Mw Roofline]

I calculate if that is 9mm timber on the windows that bird would have been flying at 120mph to go through it

 

[noseall]

I calculate if that is 9mm timber on the windows that bird would have been flying at 120mph to go through it

 

[catlad]

I hope you are replacing the ground floor windows as well so it blends in a bit, I like that cement cladding how did you gauge your plank spacing's?

 

[noseall]

how did you gauge your plank spacing's?

Planks are 190mm deep and there is a 30mm overlap, thus leaving 160mm showing. We just cut a piece of batten at 160mm deep and plonked it on the top of the starter plank and drew marks.

 

[noseall]

I hope you are replacing the ground floor windows as well

All being done this Friday hopefully.

 

[catlad]

Sounds similar to my approach.
I did see see some adjustable clamps that were specific to
this job on a U.S. site that looked perfect but I can't find
them over here.