Mdpe to copper tee

[bluebaron]

Anyone ever seen a mdpe (20mm) to 15mm copper tee?

I can’t seem to find one and space tight for reducer/pipe/tee.

Any other suggestions?

 

[polesapart]

Side reduced, end reduced, side and end reduced or both ends reduced?

Anyway: 20mm equal poly Tee plus one or two of the brown 20/15 reducing kits eg Floplast screwfix 65438

 

[bluebaron]

Mdpe 20mm in and 15mm copper out both sides of tee.

 

[muggles]

A Philmac 20mm tee and a couple of Philmac copper adapters would do it

 

[bluebaron]

A Philmac 20mm tee and a couple of Philmac copper adapters would do it

yes it would but that would mean three adapters, the tee itself then 2x reducers. I was hoping to do it in one but I’m guessing it’s not the case now.
I probably just use a 20-15mm reducer then a n equal 15mm tee. Hopefully make it fit as limited space under the floor.

 

[muggles]

No, just use a couple of copper connection kits in the tee

https://www.pipestock.com/copper-connection-kit

https://www.pipestock.com/pmc-tee

 

[bluebaron]

Thanks,
Would these work don’t have time to order the ones you listed.

https://www.screwfix.com/p/floplast...eckRhZldyYlKCgvThm8aAlEpEALw_wcB&gclsrc=aw.ds

 

[muggles]

It's this one you need https://www.screwfix.com/p/floplast-copper-mdpe-adaptor-kit-15mm-x-20mm/65438

With a Floplast tee of course!

 

[bluebaron]

Yep posted the wrong size but picked up the correct one today thanks muggles.