microbore system

[sjudd]

i've just brought a new radiator and it's slightly longer than the old one (50mm approx). i was going to try putting a set in the pipes but with it being 10mm microbore is there anything i should watch out for/do as i do this it's being in place approx 15-20 years. any help would be great thanks

 

[Agile]

If its possible then I would drain the pipes and heat them up with the blowland first to temper them and make them more flexible.

You can also get external bending springs.

Tony

 

[sjudd]

thanks for the tips