Hi,
I've just joined after reading many helpful posts and am hoping that someone can help me on this issue.
I have a Miele T294C tumble dryer and on a normal cycle it runs for about 2 minutes before stopping and beeping a lot. The "finish" light is on solid and the "machine iron" light flashes. The Miele book says to contact their service dept.
After reading on here, I have tested the resistance/continuity of the thermostat, front and rear NTCs, and the heater element. All are close to normal values.
I have (carefully) checked the feed to the heater element whilst in operation and there is no voltage there.
Any suggestions anyone?
Thanks in advance..
I've just joined after reading many helpful posts and am hoping that someone can help me on this issue.
I have a Miele T294C tumble dryer and on a normal cycle it runs for about 2 minutes before stopping and beeping a lot. The "finish" light is on solid and the "machine iron" light flashes. The Miele book says to contact their service dept.
After reading on here, I have tested the resistance/continuity of the thermostat, front and rear NTCs, and the heater element. All are close to normal values.
I have (carefully) checked the feed to the heater element whilst in operation and there is no voltage there.
Any suggestions anyone?
Thanks in advance..