When turning the temperature knob anticlockwise until it reaches the stop, before pressing the red override button, the mixed water temperature appears too cold. This has only recently occurred as before when set at 7 say the temperature was fine.
I have cleaned the internal filters and the shower rose, which were not really dirty, and even increased the hot water supply temperature from the tank but it has had no real affect. I am now cleaning the thermostatic cartridge but again that seems pretty clean, so doubt whether that's the problem unless of course it is faulty.
Any advice would be appreciated.
Regards
I have cleaned the internal filters and the shower rose, which were not really dirty, and even increased the hot water supply temperature from the tank but it has had no real affect. I am now cleaning the thermostatic cartridge but again that seems pretty clean, so doubt whether that's the problem unless of course it is faulty.
Any advice would be appreciated.
Regards
