i have a mira shower and when i switch on every thing is ok after a short time the low pressure light comes on and the water goes cold,if i turn the shower off and on the low pressure light goes out and the water goes hot again till the low pressure light comes on again . this started doing this now and again now its all the time what is wrong
mira shower low pressure light on
- Thread starter jrh102
- Start date
Sponsored Links
B
breezer
low water pressure?
faulty switch?
faulty switch?
I presume this is an electric shower fed from the water main.
Check for an isolation valve on the pipe feeding the shower, check it operates correctly.
these showers frequently have a small gauze filter fitted were the mains pipe comes in. To inspect it, turn off the electricity, take the cover off, and check for the filter. You may have to disconect the compression nut on the mains pipe to inspect the filter.
Check for an isolation valve on the pipe feeding the shower, check it operates correctly.
these showers frequently have a small gauze filter fitted were the mains pipe comes in. To inspect it, turn off the electricity, take the cover off, and check for the filter. You may have to disconect the compression nut on the mains pipe to inspect the filter.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
