Hi all,
I have been reading many comments about installs for garages and external appliances and have drawn from these and a couple of books I have here to come up with the plans for some alterations to the outdoor electrics.
Now before you say, Part P, Part P, Part P..... yes I know and the document discussed here is going to be part of my submission to my LABC as it is notifiable work. Although I am not a registered part p installer or done a C&G course I have done a 4 year degree in Electricity and Electronics so I do know what I am doing - to a point and hence why I am posting this.
I need to know if my document is up to scratch. I have the key points
eg voltage drops, loads, SWA, etc but I may have missed something. I also may need to change or add things.
The information is too long for a post so I have created a PDF of the document. It can be found http://www.adriangame.co.uk/ElectChangeHouse.pdf
Lastly I have not provided any information about install in the garage except for the supply (im still thinking about it) and lastly there will be data lines to the garage in a sperate duct 54mm - these are low voltage but do they have to go on the plans?
Thanks in advance to those that do help and to those that throw scorn on DIYers - I could do this with out telling anyone, I am trying to keep to the law - and then again I am not a bottom of the rung DIYer
Oh and for those who were looking for electrical ducting - www.abplumbing.co.uk does a range of sizes - however I have no idea if they sell to consumers yet (this isnt an advert, i have nothing to do with the company, its just a resource i have found while researching the information about this install)
I have been reading many comments about installs for garages and external appliances and have drawn from these and a couple of books I have here to come up with the plans for some alterations to the outdoor electrics.
Now before you say, Part P, Part P, Part P..... yes I know and the document discussed here is going to be part of my submission to my LABC as it is notifiable work. Although I am not a registered part p installer or done a C&G course I have done a 4 year degree in Electricity and Electronics so I do know what I am doing - to a point and hence why I am posting this.
I need to know if my document is up to scratch. I have the key points
eg voltage drops, loads, SWA, etc but I may have missed something. I also may need to change or add things.
The information is too long for a post so I have created a PDF of the document. It can be found http://www.adriangame.co.uk/ElectChangeHouse.pdf
Lastly I have not provided any information about install in the garage except for the supply (im still thinking about it) and lastly there will be data lines to the garage in a sperate duct 54mm - these are low voltage but do they have to go on the plans?
Thanks in advance to those that do help and to those that throw scorn on DIYers - I could do this with out telling anyone, I am trying to keep to the law - and then again I am not a bottom of the rung DIYer
Oh and for those who were looking for electrical ducting - www.abplumbing.co.uk does a range of sizes - however I have no idea if they sell to consumers yet (this isnt an advert, i have nothing to do with the company, its just a resource i have found while researching the information about this install)