Firstly, new to the forum although I've been a casual reader for a while (since buying first property last Nov - yay!), so Hi!
I'm a bit perplexed; I'm looking to put some LED strips inside two new glass fronted wall cabinets, probably on the L&R sides right at the front; but I'm just not sure on the best way to wire them (as in physically run the wires) - my two options considered so far are:
1) Drill a hole in the bottom at the back of each cabinet and run the wires up into here and along the bottom (back and sides) to the base of each strip
2) Drill through the shelf mounting holes between the two cabinets and also through the RH cabinet into the dummy cabinet next to it (has a meter in it and a gap at the bottom/back already) and run all the wires through these
My concern is mainly with drilling holes in three week old kitchen cabinets if there's a neater way of doing things! But I realise that it's likely a necessity... just a matter of how best to do it!
Any thoughts/ideas appreciated!
I'm a bit perplexed; I'm looking to put some LED strips inside two new glass fronted wall cabinets, probably on the L&R sides right at the front; but I'm just not sure on the best way to wire them (as in physically run the wires) - my two options considered so far are:
1) Drill a hole in the bottom at the back of each cabinet and run the wires up into here and along the bottom (back and sides) to the base of each strip
2) Drill through the shelf mounting holes between the two cabinets and also through the RH cabinet into the dummy cabinet next to it (has a meter in it and a gap at the bottom/back already) and run all the wires through these
My concern is mainly with drilling holes in three week old kitchen cabinets if there's a neater way of doing things! But I realise that it's likely a necessity... just a matter of how best to do it!
Any thoughts/ideas appreciated!