Neater rad feed suggestions appreciated

[Brigadier]

Need to replace the feeds above, to lose the redundant feeds into the room behind. Also need to keep the drain cock or cocks.

My first inclination would be to remove the lot, fit blank ends where the redundant feeds were, then replace and reconnect. But I've always thought they looked a bit untidy.

Is there a simple and neater way?

(take for granted that new skirting board will be put in!)

TIA

 

[ianmcd]

you dont need drain cocks on bothe ends only one so you could change to a lockshield with drain down would be much neater

https://www.screwfix.com/p/chrome-angled-radiator-valve-drain-off-15mm-x/70408