picked up a new IIYAMA flat screen lcd monitor model A54134UT (12V 3.5A 45w) but no mains lead . any ideas where i can get one and what will it cost?
need mains lead for lcd monitor
- Thread starter berenice2000
- Start date
B
breezer
nick one off the kettle, thats what mine is (i just looked)
Assuming its DC 12v 3.5A this will do by the looks of it
http://www.maplin.co.uk/Module.aspx?ModuleNo=48517&criteria=12v power supply&doy=5m7
remember to set it to 12V, thats the important bit.
the current is dependable on what the monitor requires, the one in the link can do 4-5A, so it should be perfect and you wont need to set the current in any way.
take a look at the back of your monitor and check that the plug looks like one of the ones in the picture of that power supply.
http://www.maplin.co.uk/Module.aspx?ModuleNo=48517&criteria=12v power supply&doy=5m7
remember to set it to 12V, thats the important bit.
the current is dependable on what the monitor requires, the one in the link can do 4-5A, so it should be perfect and you wont need to set the current in any way.
take a look at the back of your monitor and check that the plug looks like one of the ones in the picture of that power supply.
kettle socket too large need one that is about 5mm round and wide
thanks for the details of the adaptor this looks perfect
