Hi im wanting to install a hive receiver i have neomitis at the min i will attach pictures do the wires go in the same place as my old receiver i will also attach a picture of my boiler thanks


Any reason you’ve bought a Hive dual channel (mains voltage) then? Neomitis will likely be volt free, so could be 24v from the Vaillant.Thanks for reply yeah vaillant is a combi and receiver is a single receiver

That’s up to you based on the followingwould it be best sending it back
Can be fitted, but wiring alterations are required at receiver and the boiler. If you had a single channel wiring alterations are done at the receiver only.and getting hive just for heating or could it still be fitted ?

+1Neomitis will likely be volt free, so could be 24v from the Vaillant.

As per post #6. It would need wiring alterations at both ends.Would that work ? Or would it be best just sending back and getting single channel?

No, iirc the Neomitis has 3 as common and 4 as NO (should be printed on the rear) on the Hive 1 is common and 3 is NO. So would be Black to 1 and Grey to 3. Obviously L and N would be the same.I have the single channel receiver now would the wires go exactly the same way as my old one
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local