new bath legs

[trevorbayliss]

I have been given a 2nd hand basic acrylic bath. it has no legs

Do you know if i can buy the metal bar legs for them from somewhere ? The are the two bars which fit into a plastic clamp on each side of the bath. I think it should also have the little leg in the middle of the bath.

If i can't get these legs the bath will have to go on the skip.

Or could i make my own frame for the bath ?

 

[flameport]

Doubtful you can get them separately, and while making a frame might be possible it's a whole load of work to save pretty much nothing at all.

A standard plastic or steel bath can be had for well under £100.

 

[trevorbayliss]

http://www.ebay.co.uk/itm/UNIVERSAL...257346?hash=item4af94e97c2:g:MIEAAOSwv-NWZcdg

I wonder if these would work ?

 

[Madrab]

Does it have the board base? The legs in your link are for a bath that has the board moulded into the base, If your's has either then yes they'll do, watch the screw sizes though. Include a wall baton and box frame on the front to support the sides. Fit a centre support.