• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

New Build - Pipe noise - Hot Water

It'll likely to be the movement of plastic pipe against joists as it expands with the heat (by the order of at least 1mm/m for every 10C rise), although that alone might not fully explain why it's only just started happening. If there's any way you can get some access to it then some felt pipe lagging between the friction surfaces would resolve it (not to much - all too easy to make it start rubbing somewhere else if you're not careful), and even a bit of pushing/pulling on the pipework can make it settle in a slightly different - more 'relaxed' - position where movement from expansion can manifest itself slightly differently.
 
Last edited:
It'll likely to be the movement of plastic pipe against joists as it expands with the heat (by the order of at least 1mm/m for every 10C rise), although that alone might not fully explain why it's only just started happening. If there's any way you can get some access to it then some felt pipe lagging between the friction surfaces would resolve it (not to much - all too easy to make it start rubbing somewhere else if you're not careful), and even a bit of pushing/pulling on the pipework can make it settle in a slightly different - more 'relaxed' - position where movement from expansion can manifest itself slightly differently.


The pipe work isn’t easy to get to at all sadly, it’s in the ceiling and under some karndean etc in the en-suite.

Its really loud!
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top