new Dishwasher not turning on - A simple error?

[versioncity]

I've just installed a new Beko dishwasher.

Plumbed it in etc, when I turn the mains on all the lights on the console/door flash briefly and it beeps so power is definitely working but then it goes off. When I press the on/off button to begin, nothing happens.

Hoping I've just made a simple mistake? Any thoughts?

 

[Bear2Biker]

some machines have auto water pressure sense, is the water on or pipe blocked?

 

[CountryFan]

when I turn the mains on all the lights on the console/door flash briefly and it beeps so power is definitely working but then it goes off.

This makes no sense. Have you confirmed correct voltage? Is it on a plug-top or hard wired?

 

[Old Salt]

I had a bosch washing machine, brand new, plugged in, lit up then nothing. Took them 7 days to take it away and deliver a new one.

 

[versioncity]

some machines have auto water pressure sense, is the water on or pipe blocked?

Water is on, will take it out again and check pipe but pretty sure it's ok. Thanks

 

[versioncity]

This makes no sense. Have you confirmed correct voltage? Is it on a plug-top or hard wired?

It's just a 13amp plug. The one it came with is plugged into a socket.

 

[yorksbuilder]

Is the waste pipe blanking plug removed? (Apologies if this is a replacement of an existing dw and the drainage is already working)

 

[versioncity]

Is the waste pipe blanking plug removed? (Apologies if this is a replacement of an existing dw and the drainage is already working)

I've already connected it into the plumbing. - Presumably that would be at the end of the waste pipe where it connects?

 

[blup]

Is the door closing properly