Hi, need some advice regarding a new MCB for a shower.
I am installing a shower and have a spare MCB (15A) on the CU that I would like to replace with a 45 A MCB. Is this a fairly straight forward task, i.e.. turning off the main switch of the CU, removing existing MCB and then replacing with the new one. I understand that the 45A MCB would need to be closest to the main switch. Is this a case of just moving the other MCB's along and putting the 45A MCB in its respective place?
Any help would be appreciated.
++++++++++++++++++
Moderator's Note:
Welcome to the forums.
Please familiarise yourself with
//www.diynot.com/forums/viewtopic.php?t=19448
including no. 20
Mod Rupert
+++++++++++++++++
I am installing a shower and have a spare MCB (15A) on the CU that I would like to replace with a 45 A MCB. Is this a fairly straight forward task, i.e.. turning off the main switch of the CU, removing existing MCB and then replacing with the new one. I understand that the 45A MCB would need to be closest to the main switch. Is this a case of just moving the other MCB's along and putting the 45A MCB in its respective place?
Any help would be appreciated.
++++++++++++++++++
Moderator's Note:
Welcome to the forums.
Please familiarise yourself with
//www.diynot.com/forums/viewtopic.php?t=19448
including no. 20
Mod Rupert
+++++++++++++++++