Any one had a go at home nickle or copper plating ,want some small bike bits cleaning then plating seen several kits advertised any body any experiance on cleaning plating ?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
nickel plating
- Thread starter cross thread
- Start date
It may be worth perusing the Classic Bike magazine services.....home plating is terribly thin, but of course you can speed the process up by preparing the bits yourself, by having them glass bead or nut kernel cleaned and then rubbed down with wet and dry paper.
John
John
- Joined
- 25 Feb 2005
- Messages
- 1,416
- Reaction score
- 207
- Country
You tube has some demos on it.
Frank
Frank
B
Brigade77
I've done lots of home anodising with very good & repeatable results.
By far the biggest help I got was from the Caswell help forums : https://forum.caswellplating.com/
I'd say stay away from kits & assemble your own setup unless it's just 1 or 2 items you need to plate, they are seldom VFM & mostly include ****e chemicals.
By far the biggest help I got was from the Caswell help forums : https://forum.caswellplating.com/
I'd say stay away from kits & assemble your own setup unless it's just 1 or 2 items you need to plate, they are seldom VFM & mostly include ****e chemicals.
- Joined
- 24 Dec 2016
- Messages
- 1
- Reaction score
- 0
- Country
You tube has some demos on it.
haha,maybe i should have a watch sometime
