S
skuba
i've got a leisure rangemaster eb 10 frx and the element needs replacing. i've taken off the back panel inside the oven to get to the element, and i was expecting a few screws holding it in place ...but there aren't any screw heads! there are 2 round pieces of metal, which i think could be the end of some screw threads as if it was screwed in from the rear of the oven, but i've been around the back and there's nothing to unscrew??
so i wondered if it was just clipped in to place, but yanking it about doesn't fully release it. the bottom half of the bracket has come free so the element swivels a bit, but it doesn't want to come free. i could pull harder, but i don't want to risk causing damage
any ideas? am i missing something here??? thanks....
P.S. apologies, i know it needs a clean!
so i wondered if it was just clipped in to place, but yanking it about doesn't fully release it. the bottom half of the bracket has come free so the element swivels a bit, but it doesn't want to come free. i could pull harder, but i don't want to risk causing damage
any ideas? am i missing something here??? thanks....
P.S. apologies, i know it needs a clean!