Hi all,
My boiler is able to generate domestic hot water supply but no central heating. Just from reading another thread on this issue - I managed to turn my pressure up to 1.5 bars again. It was previously under 1 bar. However, after doing so, I am still unable to get the central heating to work.
The boiler has been acting up a lot recently - central heating usually gets cut off and I've had to reset the boiler every morning to get it started again. The display monitor has also been showing the codes: 'L2' and 'F2' quite a bit. It currently displays '0'.
May I please ask for some advice and thoughts as to what the potential issues are.
Many thanks in advance and I will really appreciate your input!
My boiler is able to generate domestic hot water supply but no central heating. Just from reading another thread on this issue - I managed to turn my pressure up to 1.5 bars again. It was previously under 1 bar. However, after doing so, I am still unable to get the central heating to work.
The boiler has been acting up a lot recently - central heating usually gets cut off and I've had to reset the boiler every morning to get it started again. The display monitor has also been showing the codes: 'L2' and 'F2' quite a bit. It currently displays '0'.
May I please ask for some advice and thoughts as to what the potential issues are.
Many thanks in advance and I will really appreciate your input!
