Odd underground pipe? Can anyone identify?

[just pumps]

Pretty sure I saw a picture of pipe like that on another forum recently, I`ve had a look but can`t find it now. Not helping I know but frustrating me!

 

[Daveydub]

My guess, and it is a guess, just badly made. When you cut it out it may be perfectly normal inside

 

[picasso]

Might be a section made for a saddle connection ?

 

[jeff the gasman]

In the words of Monty Python,it's thin at one end, much much thicker in the middle and thin again at the other end! Therefore I deduce it's a brontasaurus!

 

[Terrywookfit]

Why not excavate beneath it and make a concrete base for the I C finishing halfway up the pipe. The top of the pipe can be removed with a grinder and cutting disc to form the channel and the ic built out of bricks......Simples !!!

 

[Hugh Jaleak]

That wooden shovel looks hard work!!

That's the trench support.

 

[JimCrow]

http://www.knowlesdrainage.co.uk/pr...goryID=5&subcategoryID=10&parentproductID=608

 

[oilboffin]

Just a swell in a piece of pipe it's deformed in the kiln.Bob

 

[dilalio]

All done and jobbies are back on their way to the seaside

It wasn’t deformed or owt, perfect circle inner and outer ID. We got a plastic IC onto it and picked up the new connection no problem.

Just was curious on what it was made for?

Thanks to all for the input,

Deano.

 

[dilalio]

http://www.knowlesdrainage.co.uk/pr...goryID=5&subcategoryID=10&parentproductID=608

Close but no cigar
It tapered out then back in again but... nearest to the actual thing in the ground Jim

 

[Ian H]

Just was curious on what it was made for?

Internet discussion in the future?

 

[dilalio]

Internet discussion in the future?

Now that’s foresight!