Offset drill attachment

[600rob]

Anyone know if there is a product available like this
https://www.screwfix.com/p/erbauer-angled-bit-holder-160mm/9929v

but accepts a round drill bit shank as opposed to a hex shank?

 

[big-all]

no because you need a chuck to grip the round drill bit
what exactly is it for

 

[SFK]

I have used this when at a push
https://www.ebay.co.uk/itm/RIGHT-AN...973005?hash=item443c089acd:g:W-UAAOSwajRcwtX5
but is very lightweight.
SFK

 

[600rob]

Im making a log press from a tree i cut down
Like this...

https://images.app.goo.gl/yhY59az3nxDTzLwH7

Need to some thing to get into the pockets in order to drill the pilot holes for the handle plates that i can then bolt in by hand


Was thinking of grinding square an old drill bit shank and trying to use a short handled tap wrench to make the pilot holes.
.
Might try that before buying anything

 

[big-all]

hows about large dowels instead off the metal handles
as in perhaps 22-30mm diameter and a though hole

 

[foxhole]

Drill from outside, use bolts not screws and plug holes.

https://www.loveskirting.co.uk/othe...MIneffmb3q6QIVh63tCh1ZIQFSEAQYASABEgI_xPD_BwE

 

[lostinthelight]

https://www.toolstation.com/abracs-...2WdBetQBrjTZJqf5ZFmiX_-_i4SXsnnhoCvGUQAvD_BwE


https://www.toolstation.com/offset-...LB90TdTyS175oZYvrEP7xvZmA3z1qh2RoC-HIQAvD_BwE

 

[cdbe]

It's called an angled chuck, but they're not that cheap. I think mine was off a metabo before I grafted it onto an old Bosch. Great for drilling holes in joists. DeWalt etc do cordless versions with a chuck.

 

[600rob]

https://www.toolstation.com/abracs-...2WdBetQBrjTZJqf5ZFmiX_-_i4SXsnnhoCvGUQAvD_BwE


https://www.toolstation.com/offset-...LB90TdTyS175oZYvrEP7xvZmA3z1qh2RoC-HIQAvD_BwE

That fits the bill nicely. Needed a new set of pilot bits for another job anyway.
Cheers