Hi, Looking for some help please!
I'm currently repairing the concrete/base around existing toilet waste pipe.
As I'm at this stage, thought I'd ask Is there need to do anything with the old waste? (1960s waste)
The flange/collar sits above concrete slab level about 100mm. The waste runs out towards the red brick.
Planning on fitting a new toilet, probably a 'back to wall type' if possible.
Waste is currently 180mm from wall, but note I am installing 3x2 studwork/15mm plasterboard (78mm) so waste would then be approx 100mm to plasterboard).
Cheers for any help
I'm currently repairing the concrete/base around existing toilet waste pipe.
As I'm at this stage, thought I'd ask Is there need to do anything with the old waste? (1960s waste)
The flange/collar sits above concrete slab level about 100mm. The waste runs out towards the red brick.
Planning on fitting a new toilet, probably a 'back to wall type' if possible.
Waste is currently 180mm from wall, but note I am installing 3x2 studwork/15mm plasterboard (78mm) so waste would then be approx 100mm to plasterboard).
Cheers for any help