Hi, i have one radiator not working but all other heaters throughout house working. I have bleed it and cold clear water is coming out, also took the valve off and checked the pin all seem to be fine but still not getting warm. any suggestions.
One radiator not working
- Thread starter plumbstuck
- Start date
D
dextrous
What is that? only thing to open will need a spanner to do it is this correct?
D
dextrous
The valve at the other end of the radiator - you may need a small spanner or a pair of pliers or even a screwdriver depending on the make.
What is that? only thing to open will need a spanner to do it is this correct?
D
dextrous
Hi, i opened the valve and a bowl of water came out. At the main valve the pipe is hot but radiator is not will i need to bleed again?
D
dextrous
I meant for you to turn the spindle at the top, not undo it. Kind of like opening a tap to allow a greater flow through it.
I needed an alan key to release mine but it got stuck but it did help. So now i have pipe warm at main valve but water not goin to radiator.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
