One Strike for plaster drying cracks pre mist?

[paulalde]

Evening,

I'm planning on misting some fresh plaster this weekend (drying since before Xmas) and I noticed a few drying cracks by the timber door casings. Considering we had 2 landings and stairs done I'm happy to only find a few.

I plan on racking them out a bit before applying some filler. I'm wondering if Everbuild
One Strike will be suitable for the job as I have a full tub handy. I've heard Tetrion is good but isn't great for painting over.

Cheers

 

[opps]

One Strike should be fine. Personally I prefer either Toupret Redlite or Red Devil One Time (they tend to overheat less when sanded with electric sanders).

Consider using 150 to 180 grit paper to sand the filler. Because it is quite soft, using 80 grit will create minor depressions.