Outside black telephone cable
- Thread starter MrMrMr111
- Start date
Any 2 core will do for a temp. repair just look in you conection box where the cable enters your house and see which pair are used then connect both ends of your 2 wire to the same pair at each end and insulate. Crimps will do or solder and shrink tube and amalgamating tape If you particularly want the same cable than take your pick here
Where it goes in box is a bit of a pain to get to do was just going to do the joint outside where it's cut.
I was just going to use some terminal strip and amalgamating tape. It's just to get it working for now until fibre installed.
I'm still struggling to find cables locally, I wanted it for tomorrow, just thought above would have done. All seem like are 25M drums to! I only need a couple of metres
I was just going to use some terminal strip and amalgamating tape. It's just to get it working for now until fibre installed.
I'm still struggling to find cables locally, I wanted it for tomorrow, just thought above would have done. All seem like are 25M drums to! I only need a couple of metres
The correct jointing kit is eg https://www.ebay.co.uk/itm/233823894403
The same seller has 2m of drop wire if you do need extra length (in which case you'd probably need 2 of the joint kits too)
If you're desperate buy an ethernet patch cable and cut that up. I think even poundland have them.
The same seller has 2m of drop wire if you do need extra length (in which case you'd probably need 2 of the joint kits too)
If you're desperate buy an ethernet patch cable and cut that up. I think even poundland have them.
Links in this post may contain affiliate links for which DIYnot may be compensated.
They look good. I may order those, but do a temp.fix for now thanks.
Didn't think about ethernet cable I've got some lengths of those, you think they'll be ok?
Links in this post may contain affiliate links for which DIYnot may be compensated.
Yes.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
