Hi, I have an outdoor light with an inbuilt PIR. The house is opposite a field so at night it’s pitch black and one light is not adequate.
I can see the cable in the garage that passes through the external wall to feed the light.
What I want to do is basically remove the existing light and replace it with three lights and one PIR. I’ll need to check the existing load of course, but if I took a feed from the existing feed to power two more outdoor lights and the PIR is it Part P? I’m a DIY’er.
I read on another post that it’s only Part P if installing a new circuit (which I don’t think is what I’ve tried to decribe above?).
Many thanks.
I can see the cable in the garage that passes through the external wall to feed the light.
What I want to do is basically remove the existing light and replace it with three lights and one PIR. I’ll need to check the existing load of course, but if I took a feed from the existing feed to power two more outdoor lights and the PIR is it Part P? I’m a DIY’er.
I read on another post that it’s only Part P if installing a new circuit (which I don’t think is what I’ve tried to decribe above?).
Many thanks.