- Joined
- 18 Nov 2007
- Messages
- 929
- Reaction score
- 28
- Country
Moving into a new house and the previous occupants cladded the old ceiling with some tongue and groove. This could be to cover up some cracking or whatever. What I wanted to do to save ripping it all down was to overboard this with 12.5mm P/B then skim it.
Only thing is the the cladding is only about 1/2" thick so wont be able to screw straight into this to hold the P/b on to it alone, I suppose I could get a few hits into the the joists themselves every so often with longer screws.
Would this be acceptable? I know ceiling P/B needs to be fixed in good an proper...
Only thing is the the cladding is only about 1/2" thick so wont be able to screw straight into this to hold the P/b on to it alone, I suppose I could get a few hits into the the joists themselves every so often with longer screws.
Would this be acceptable? I know ceiling P/B needs to be fixed in good an proper...