Paint over gloss.
- Thread starter lizzy
- Start date
Sponsored Links
B
breezer
perhaps they used gloss to stop condensation "soaking in", or easier to clean?
- Joined
- 28 Nov 2003
- Messages
- 1,021
- Reaction score
- 1
- Country
Hi,
had to do one myself not long back, not the most pleasant of jobs.
Firstly, lightly sand the surface to provide a key (wear goggles and a mask).
Optional, but I always do, clean the surface with some sugar soap and mutton cloth.
One coat of good quality (oil based) undercoat - the sort usually used for wood. It's essential that you have plenty of ventilation as oil based paints stink when used over a large area.
Then finish with a coat of emulsion (silk or matt).
Hope this helps.
had to do one myself not long back, not the most pleasant of jobs.
Firstly, lightly sand the surface to provide a key (wear goggles and a mask).
Optional, but I always do, clean the surface with some sugar soap and mutton cloth.
One coat of good quality (oil based) undercoat - the sort usually used for wood. It's essential that you have plenty of ventilation as oil based paints stink when used over a large area.
Then finish with a coat of emulsion (silk or matt).
Hope this helps.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
