Plasterboard put up back to front?

[HectorTheSpecta]

Hi all,

Wondering if I could get some assistance. Got some work going on in the bathroom. We've got a fitter in who's put some plasterboard up back-to-front. On the board it has clearly printed, "Plaster other side only".

The rest of the information says "standard wall board type-a" made by knauf.

Usually, I wouldn't have a problem but since its going into a bathroom around a shower area, is it going to be problem to plaster over the top and should i insist on having it corrected? Or has it has been intentionally put up this way.

Would appreciate any help.

 

[HectorTheSpecta]

Hi all, ignore my post.

I should've searched before posting as I've noticed other people have posted similar questions and got mixed responses... Still trawling through them before I speak to the fitter.

Cheers.

 

[roy c]

YOU DONT PUT PLASTER_BOARD IN A SHOWER AREA!!!!

WETHER IT IS GREY SIDE OUT OR WHITE SIDE OUT ...OK!!!!!!!

 

[HectorTheSpecta]

I should've mentioned it earlier but it will be skimmed and tiled on top.

 

[roy c]

Still not recommended in a "wet" area.....

 

[Richard C]

Still not recommended in a "wet" area.....

Most definitely; tank it or replace it or you will regret it!