Hi All,
I am looking for simple stuff... all solvent weld pipework none of this push fit stuff
100mm 92.5 degree branch in white
50mm reducer that will fit inside the 100mm pipe
50mm pipe in white
100mm pipe in white
100mm end cap
the solvent pipework must be flat on the outside like this:
happy to adjust the figures to 110mm etc if needed...
I've tried, homebase, b&q, plumbase, screwfix, travis, and the like...
thanks in advance all!!
I am looking for simple stuff... all solvent weld pipework none of this push fit stuff
100mm 92.5 degree branch in white
50mm reducer that will fit inside the 100mm pipe
50mm pipe in white
100mm pipe in white
100mm end cap
the solvent pipework must be flat on the outside like this:
happy to adjust the figures to 110mm etc if needed...
I've tried, homebase, b&q, plumbase, screwfix, travis, and the like...
thanks in advance all!!