Pond wall

  • Thread starter Thread starter george765
  • Start date Start date
G

george765

Hi,
Could a builder please suggest a good way to build a 5ft high rock wall and tie it into a concrete block wall which is behind it. The rocks mustn't come loose as they would fall into the pond and possibly damage the lining.
thanks, George
 
As I type I am looking at a 6' high dry stone wall. "dry" = no mortar . It depends on the batter (amount the new wall is leaning back) and the skill of the builder and the types of rock, Err, pebbles are very slippery, dressed stones are very stable. If you are worried, put in big wall plugs every 2' , then drive into the plugs big stainless steel screws without tightening them, get a stainless wall ties and bend them tightly around each screw. tighten screw. Should last for 1000 years.
Frank
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top