Potterton puma 100e

[daved1]

Hi Guys
I have another problem with the above again.

HW i get the red light saying it is asking for hw but no hw
CH no heat but seem to operate as should
all clicks seem to be there pump seems to be spinning the what i presume is a gas actuator moves, no flame no ignition and no lock out.
changed the two main boards still the same.

Helllllp

 

[ianmcd]

Get in touch with an engineer that knows what they are doing and stop just changing parts

 

[Dan Robinson]

all clicks seem to be there pump seems to be spinning the what i presume is a gas actuator moves,

A spinning pump directly moves a gas actuator?

Call a professional.... Either a gas one, or a medical practitioner....

 

[ianmcd]

Two main boards ????? ouch you could have had it fixed for a lot cheaper than the cost of what you call two main boards

 

[daved1]

Already had them years ago when a friend got rid of their boiler
The repairs i have done over the period are new diverter valve new pump and new flame sensor
Just need pointing in a rightish direction obviously if gas valve will need an engineer but at the mo cannot afford
Just as a side point is there any boilers that would just drop straight in place of the puma
Dave

 

[AGAS]

Just need pointing in a rightish direction obviously if gas valve will need an engineer

ye right

 

[Agile]

You need pointing in the direction of a gas registered engineer!

You are not going to get advice on doing DIY gas related repairs.

Tony