Potterton Suprima & profile

[gray2111]

If you are having intermitant faults with these boilers just re-solder the joints to sockets/plugs on the PCB Faults WILL BE cured 99.9999999% of the time

 

[Agile]

CORGI tell us that we are not to "repair" PCBs !!!

Perhaps you are not CORGI registered?

Tony

 

[corgiman]

its the 0.000001% one you have to really worry about

 

[Softus]

It's the idiots who think that they have the solution to 99.9999999% of PCB faults you have to really worry about.

BTW, the OP isn't the first to try out this kind of "magic cure" on the forum:
http://www.diynot.com/forums/viewtopic.php?t=46978

 

[gazthepottertonengineer]

If you are having intermitant faults with these boilers just re-solder the joints to sockets/plugs on the PCB Faults WILL BE cured 99.9999999% of the time

dangerous talk costs lives

 

[croydoncorgi]

These statements are not only tempting uninformed users to take risks. They are also gnerally untrue!
The most common problem on Suprima (old style) PCBs is blown diodes, not header pin problems
In my experience, the Profile PCB is quite reliable and not prone to any specific, easily fixed problem.

 

[corgiman]

best bloody boiler potty ever made the old profile is, hate having to change them