Hi guys, i have a fault on the panel saying its jammed, reading the manual this means that there is a raido frequenzy signal blocking the PIRs signal to the panel. I have nothing new or on within the house so am stuffed at knowing what it is..Can anyone help how i find out and or how to remedy the beeping is driving me mad (Even though i can silence it every 4 hours)...Thnaks in advance..Its a powermax Plus.
Powermax plus Fault
- Thread starter bearhug
- Start date
Sponsored Links
Hi bearhug, check to see if jamming detection is programmed to class 6 (30/60). If it its not program this setting and this may solve the issue 
A
Alarm
Could be a neighbor with a new addition.
Class 6 will help as it broadens the detection times and length.
If this does not help the next option, which is not goods is to turn off jamming detection.
Try moving detectors on walls which are party walls, this might also assist.
Class 6 will help as it broadens the detection times and length.
If this does not help the next option, which is not goods is to turn off jamming detection.
Try moving detectors on walls which are party walls, this might also assist.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
