I am eventually going to get a professional reskim carried out in my living room, however, I am doing as much preparation as I can prior to this. I am putting up some plasterboard around an arch that originally had a moulding around it. Should I put tape or mesh along the outside corners of the plasterboard? There are a few hairline cracks in the original top coat but the plaster is sound in these areas. Are these best just left as is or is it worth opening them out to allow the skim coat into the crack. Lastly, are additional corner reinforcing meshes ever fitted for a reskim ?
Preps for reskim
- Thread starter davecooper
- Start date
Sponsored Links
Tape the joints in the arch.
Fine coat beads to all external corners.
The hairline cracks may or may not need taped your plasterer will advise.
Fine coat beads to all external corners.
The hairline cracks may or may not need taped your plasterer will advise.
Thanks for that. How are the fine coat beads fitted? Are they nailed or glued on?
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
